[PATCH 0/3] Remove recursive configure for Cygwin

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

[PATCH 0/3] Remove recursive configure for Cygwin

Jon TURNEY
A couple more Makefile/configure cleanups, and remove recursive configure
for Cygwin.

For ease of reviewing, this patch series doesn't contain changes to
generated files which would be made by an autoreconf.

Jon Turney (3):
  Remove intro2man.stamp on clean
  Drop AC_SUBST(build_exeext)
  Remove recursive configure for cygwin

 winsup/Makefile.in            |    4 +-
 winsup/acinclude.m4           |   14 +-
 winsup/autogen.sh             |    5 -
 winsup/configure.ac           |   91 +-
 winsup/configure.cygwin       |   38 -
 winsup/cygserver/Makefile.in  |    4 -
 winsup/cygserver/aclocal.m4   |   55 -
 winsup/cygserver/autogen.sh   |    4 -
 winsup/cygserver/configure    | 5231 ------------------------------
 winsup/cygserver/configure.ac |   59 -
 winsup/cygwin/Makefile.in     |    8 -
 winsup/cygwin/aclocal.m4      |   54 -
 winsup/cygwin/autogen.sh      |    4 -
 winsup/cygwin/configure       | 5659 ---------------------------------
 winsup/cygwin/configure.ac    |   87 -
 winsup/doc/Makefile.in        |    8 +-
 winsup/doc/configure          | 4064 -----------------------
 winsup/doc/configure.ac       |   26 -
 winsup/testsuite/aclocal.m4   |  831 -----
 winsup/testsuite/configure    | 3950 -----------------------
 winsup/testsuite/configure.ac |   19 -
 winsup/utils/Makefile.in      |    9 +-
 winsup/utils/aclocal.m4       |   54 -
 winsup/utils/autogen.sh       |    4 -
 winsup/utils/configure        | 4409 -------------------------
 winsup/utils/configure.ac     |   36 -
 26 files changed, 92 insertions(+), 24635 deletions(-)
 delete mode 100755 winsup/configure.cygwin
 delete mode 100644 winsup/cygserver/aclocal.m4
 delete mode 100755 winsup/cygserver/autogen.sh
 delete mode 100755 winsup/cygserver/configure
 delete mode 100644 winsup/cygserver/configure.ac
 delete mode 100644 winsup/cygwin/aclocal.m4
 delete mode 100755 winsup/cygwin/autogen.sh
 delete mode 100755 winsup/cygwin/configure
 delete mode 100644 winsup/cygwin/configure.ac
 delete mode 100755 winsup/doc/configure
 delete mode 100644 winsup/doc/configure.ac
 delete mode 100644 winsup/testsuite/aclocal.m4
 delete mode 100755 winsup/testsuite/configure
 delete mode 100755 winsup/testsuite/configure.ac
 delete mode 100644 winsup/utils/aclocal.m4
 delete mode 100755 winsup/utils/autogen.sh
 delete mode 100755 winsup/utils/configure
 delete mode 100644 winsup/utils/configure.ac

--
2.28.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 1/3] Remove intro2man.stamp on clean

Jon TURNEY
---
 winsup/doc/Makefile.in | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/winsup/doc/Makefile.in b/winsup/doc/Makefile.in
index bcf0c1fb2..cb46a91cf 100644
--- a/winsup/doc/Makefile.in
+++ b/winsup/doc/Makefile.in
@@ -61,8 +61,9 @@ clean:
  rm -f Makefile.dep
  rm -f *.html *.html.gz
  rm -Rf cygwin-api cygwin-ug cygwin-ug-net faq
- rm -f *.1 utils2man.stamp
- rm -f *.3 api2man.stamp
+ rm -f api2man.stamp intro2man.stamp utils2man.stamp
+ rm -f *.1
+ rm -f *.3
  rm -f *.info* charmap
 
 install: install-all
--
2.28.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 2/3] Drop AC_SUBST(build_exeext)

Jon TURNEY
In reply to this post by Jon TURNEY
The autoconf variable build_exeext isn't defined, and it's value isn't
used.
---
 winsup/doc/configure.ac | 2 --
 1 file changed, 2 deletions(-)

diff --git a/winsup/doc/configure.ac b/winsup/doc/configure.ac
index 8364dc79e..32e52415a 100644
--- a/winsup/doc/configure.ac
+++ b/winsup/doc/configure.ac
@@ -20,7 +20,5 @@ AC_CANONICAL_TARGET
 
 AC_PROG_CC
 
-AC_SUBST(build_exeext)
-
 AC_CONFIG_FILES([Makefile])
 AC_OUTPUT
--
2.28.0

Reply | Threaded
Open this post in threaded view
|

[PATCH 3/3] Remove recursive configure for cygwin

Jon TURNEY
In reply to this post by Jon TURNEY
There's doesn't seem to be much use in independently building these
subdirectories, so allowing them to be independently configured seems
pointless and overcomplicated.

The order in which the subdirectories are built is still a little odd,
as cygwin is linked with libcygserver, and cygserver is then linked with
cygwin. So, we build the cygwin directory first, which invokes a build
of libcygserver in the cygserver directory, and then build in the
cygserver directory to build the cygserver executable.

Drop AC_CONFIGURE_ARGS, since we don't need to recursively call
configure with the same arguments anymore.

Slightly refine when we build utils: Previously we didn't build any
utils if MinGW compiler use was avoided, now we just avoid building
those utils which require that compiler.

Greatly simplify how winsup_srcdir and target_builddir are set, since
we're only configuring from one directory.  (These are still kept
absolute, since we don't adjust them where used for being used in a
subdirectory).

Remove configure.cygwin and put it's (greatly reduced) contents inline
in the one place it's used now.

Remove generated configure and aclocal.m4 in subdirectories.
---
 winsup/Makefile.in            |    4 +-
 winsup/acinclude.m4           |   14 +-
 winsup/autogen.sh             |    5 -
 winsup/configure.ac           |   91 +-
 winsup/configure.cygwin       |   38 -
 winsup/cygserver/Makefile.in  |    4 -
 winsup/cygserver/aclocal.m4   |   55 -
 winsup/cygserver/autogen.sh   |    4 -
 winsup/cygserver/configure    | 5231 ------------------------------
 winsup/cygserver/configure.ac |   59 -
 winsup/cygwin/Makefile.in     |    8 -
 winsup/cygwin/aclocal.m4      |   54 -
 winsup/cygwin/autogen.sh      |    4 -
 winsup/cygwin/configure       | 5659 ---------------------------------
 winsup/cygwin/configure.ac    |   87 -
 winsup/doc/Makefile.in        |    3 -
 winsup/doc/configure          | 4064 -----------------------
 winsup/doc/configure.ac       |   24 -
 winsup/testsuite/aclocal.m4   |  831 -----
 winsup/testsuite/configure    | 3950 -----------------------
 winsup/testsuite/configure.ac |   19 -
 winsup/utils/Makefile.in      |    9 +-
 winsup/utils/aclocal.m4       |   54 -
 winsup/utils/autogen.sh       |    4 -
 winsup/utils/configure        | 4409 -------------------------
 winsup/utils/configure.ac     |   36 -
 26 files changed, 89 insertions(+), 24631 deletions(-)
 delete mode 100755 winsup/configure.cygwin
 delete mode 100644 winsup/cygserver/aclocal.m4
 delete mode 100755 winsup/cygserver/autogen.sh
 delete mode 100755 winsup/cygserver/configure
 delete mode 100644 winsup/cygserver/configure.ac
 delete mode 100644 winsup/cygwin/aclocal.m4
 delete mode 100755 winsup/cygwin/autogen.sh
 delete mode 100755 winsup/cygwin/configure
 delete mode 100644 winsup/cygwin/configure.ac
 delete mode 100755 winsup/doc/configure
 delete mode 100644 winsup/doc/configure.ac
 delete mode 100644 winsup/testsuite/aclocal.m4
 delete mode 100755 winsup/testsuite/configure
 delete mode 100755 winsup/testsuite/configure.ac
 delete mode 100644 winsup/utils/aclocal.m4
 delete mode 100755 winsup/utils/autogen.sh
 delete mode 100755 winsup/utils/configure
 delete mode 100644 winsup/utils/configure.ac

diff --git a/winsup/Makefile.in b/winsup/Makefile.in
index f1c1ce771..598ddf51c 100644
--- a/winsup/Makefile.in
+++ b/winsup/Makefile.in
@@ -40,7 +40,7 @@ INSTALL:=@INSTALL@
 INSTALL_PROGRAM:=@INSTALL_PROGRAM@
 INSTALL_DATA:=@INSTALL_DATA@
 
-SUBDIRS=@subdirs@
+SUBDIRS=cygwin cygserver doc utils
 INSTALL_SUBDIRS=${patsubst %,install_%,$(SUBDIRS)}
 CLEAN_SUBDIRS=${patsubst %,clean_%,$(SUBDIRS)}
 
@@ -88,7 +88,7 @@ $(CLEAN_SUBDIRS):
 
 .PRECIOUS: Makefile
 
-Makefile: Makefile.in $(srcdir)/configure config.status
+Makefile: Makefile.in ${patsubst %,%/Makefile.in,$(SUBDIRS)} $(srcdir)/configure config.status
  $(SHELL) config.status
 
 config.status: configure
diff --git a/winsup/acinclude.m4 b/winsup/acinclude.m4
index 5248e2a2a..d34d337e1 100644
--- a/winsup/acinclude.m4
+++ b/winsup/acinclude.m4
@@ -16,7 +16,7 @@ if test -z "$newlib_headers"; then
 fi
 newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
 
-INCLUDES="-I${srcdir}/../cygwin -I${target_builddir}/winsup/cygwin"
+INCLUDES="-I${winsup_srcdir}/cygwin -I${target_builddir}/winsup/cygwin"
 INCLUDES="${INCLUDES} -isystem ${cygwin_headers}"
 for h in ${newlib_headers}; do
     INCLUDES="${INCLUDES} -isystem $h"
@@ -24,17 +24,5 @@ done
 AC_SUBST(INCLUDES)
 ])
 
-AC_DEFUN([AC_CONFIGURE_ARGS], [
-configure_args=X
-for f in $ac_configure_args; do
-    case "$f" in
- *--srcdir*) ;;
- *) configure_args="$configure_args $f" ;;
-    esac
-done
-configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
-AC_SUBST(configure_args)
-])
-
 AC_SUBST(target_builddir)
 AC_SUBST(winsup_srcdir)
diff --git a/winsup/autogen.sh b/winsup/autogen.sh
index 12373891e..0b1d4668d 100755
--- a/winsup/autogen.sh
+++ b/winsup/autogen.sh
@@ -10,8 +10,3 @@ fi
 /usr/bin/aclocal --force
 /usr/bin/autoconf -f
 /bin/rm -rf autom4te.cache
-res=0
-for d in cygwin utils cygserver; do
-    (cd $d && exec ./autogen.sh) || res=1
-done
-exit $res
diff --git a/winsup/configure.ac b/winsup/configure.ac
index 65369ae7f..cf118bad5 100644
--- a/winsup/configure.ac
+++ b/winsup/configure.ac
@@ -9,11 +9,22 @@ dnl
 dnl Process this file with autoconf to produce a configure script.
 
 AC_PREREQ([2.59])
-AC_INIT([Cygwin toplevel],[0],[[hidden email]],[cygwin],[https://cygwin.com])
+AC_INIT([Cygwin],[0],[[hidden email]],[cygwin],[https://cygwin.com])
 AC_CONFIG_SRCDIR(Makefile.in)
 AC_CONFIG_AUX_DIR(..)
 
-. ${srcdir}/configure.cygwin
+realdirpath() {
+    test -z "$1" && return 1
+    (cd "$1" 2>/dev/null && pwd)
+    if test $? -ne 0; then
+ return 1
+    else
+ return 0
+    fi
+}
+
+winsup_srcdir="$(realdirpath $srcdir)"
+target_builddir="$(realdirpath ..)"
 
 AC_PROG_INSTALL
 AC_NO_EXECUTABLES
@@ -23,16 +34,82 @@ AC_PROG_CC
 AC_PROG_CXX
 AC_PROG_CPP
 AC_LANG(C)
-AC_ARG_WITH([cross-bootstrap],[AS_HELP_STRING([--with-cross-bootstrap],[do not build programs using the mingw toolchain or check for mingw libraries (useful for bootstrapping a cross-compiler)])],[],[with_cross_bootstrap=no])
-
 AC_LANG(C++)
 
+AC_ARG_WITH([cross-bootstrap],[AS_HELP_STRING([--with-cross-bootstrap],[do not build programs using the MinGW toolchain or check for MinGW libraries (useful for bootstrapping a cross-compiler)])],[],[with_cross_bootstrap=no])
+
 AC_CYGWIN_INCLUDES
 
-AC_CONFIG_SUBDIRS(cygwin cygserver doc)
+AC_CONFIG_HEADER(cygwin/config.h)
+
+case "$with_cross_host" in
+  ""|*cygwin*)
+    all_host="all_host"
+    ;;
+  *)
+    all_host=
+    ;;
+esac
+
+AC_SUBST(all_host)
+
+AC_CHECK_TOOL(AR, ar, ar)
+AC_CHECK_TOOL(AS, as, as)
+AC_CHECK_TOOL(DLLTOOL, dlltool, dlltool)
+AC_CHECK_TOOL(LD, ld, ld)
+AC_CHECK_TOOL(NM, nm, nm)
+AC_CHECK_TOOL(OBJCOPY, objcopy, objcopy)
+AC_CHECK_TOOL(OBJDUMP, objdump, objdump)
+AC_CHECK_TOOL(RANLIB, ranlib, ranlib)
+AC_CHECK_TOOL(STRIP, strip, strip)
+AC_CHECK_TOOL(WINDRES, windres, windres)
+
+AC_ARG_ENABLE(debugging,
+[ --enable-debugging Build a cygwin DLL which has more consistency checking for debugging],
+[case "${enableval}" in
+yes) AC_DEFINE([DEBUGGING],[1],[Define if DEBUGGING support is requested.]) ;;
+no) ;;
+esac
+])
+
+case "$target_cpu" in
+   i?86)
+ DLL_NAME="cygwin1.dll"
+ DLL_ENTRY="_dll_entry@12"
+ DEF_DLL_ENTRY="dll_entry@12"
+ DIN_FILE="i686.din"
+ TLSOFFSETS_H="tlsoffsets.h"
+ ;;
+   x86_64)
+ DLL_NAME="cygwin1.dll"
+ DLL_ENTRY="dll_entry"
+ DEF_DLL_ENTRY="dll_entry"
+ DIN_FILE="x86_64.din"
+ TLSOFFSETS_H="tlsoffsets64.h"
+ ;;
+   *) AC_MSG_ERROR([Invalid target processor "$target_cpu"]) ;;
+esac
+
+AC_SUBST(DLL_NAME)
+AC_SUBST(DLL_ENTRY)
+AC_SUBST(DEF_DLL_ENTRY)
+AC_SUBST(DIN_FILE)
+AC_SUBST(TLSOFFSETS_H)
+
+AC_CHECK_PROGS([DOCBOOK2XTEXI], [docbook2x-texi db2x_docbook2texi], [true])
+
 if test "x$with_cross_bootstrap" != "xyes"; then
-    AC_CONFIG_SUBDIRS([utils])
+    AC_CHECK_PROGS(MINGW_CXX, ${target_cpu}-w64-mingw32-g++)
+    test -n "$MINGW_CXX" || AC_MSG_ERROR([no acceptable MinGW g++ found in \$PATH])
 fi
+AC_EXEEXT
+
+AC_CONFIG_FILES([
+    Makefile
+    cygwin/Makefile
+    cygserver/Makefile
+    doc/Makefile
+    utils/Makefile
+])
 
-AC_CONFIG_FILES([Makefile])
 AC_OUTPUT
diff --git a/winsup/configure.cygwin b/winsup/configure.cygwin
deleted file mode 100755
index ff1f749c4..000000000
--- a/winsup/configure.cygwin
+++ /dev/null
@@ -1,38 +0,0 @@
-realdirpath() {
-    [ -z "$1" ] && return 1
-    (cd "$1" 2>/dev/null && pwd)
-    if test $? -ne 0; then
- return 1
-    else
- return 0
-    fi
-}
-
-for d in . .. ../.. ../../..; do
-    if test -e "$srcdir/$d/configure.cygwin"; then
- winsup_srcdir=$(realdirpath "$srcdir/$d")
- break
-    fi
-done
-
-if test -z "$winsup_srcdir"; then
-    echo "cannot find directory containing configure.cygwin" 1>&2
-    exit 1
-fi
-
-case "$srcdir" in
-    */newlib*) lookfor=newlib ;;
-    */winsup*) lookfor=winsup ;;
-    *) lookfor=. ;;
-esac
-
-for d in . .. ../.. ../../..; do
-    if test -d "$d/$lookfor"; then
- target_builddir=$(realdirpath "$d")
- break
-    fi
-done
-
-if test -z "$target_builddir"; then
-    target_builddir=$(pwd)
-fi
diff --git a/winsup/cygserver/Makefile.in b/winsup/cygserver/Makefile.in
index 7b250dd68..c37dc7c8f 100644
--- a/winsup/cygserver/Makefile.in
+++ b/winsup/cygserver/Makefile.in
@@ -9,7 +9,6 @@
 srcdir:=@srcdir@
 target_builddir:=@target_builddir@
 winsup_srcdir:=@winsup_srcdir@
-configure_args=@configure_args@
 
 CFLAGS:=@CFLAGS@
 override CXXFLAGS=@CXXFLAGS@
@@ -66,9 +65,6 @@ cygserver.exe: $(CYGWIN_LIB) $(OBJS)
 $(cygwin_build)/%.o:
  $(MAKE) -C $(@D) $(@F)
 
-Makefile: Makefile.in configure
- ./config.status
-
 lib%.o: %.cc
  ${filter-out -D__OUTSIDE_CYGWIN__, $(COMPILE.cc)} -c -o $(@D)/${basename $(@F)}.o $<
 
diff --git a/winsup/cygserver/aclocal.m4 b/winsup/cygserver/aclocal.m4
deleted file mode 100644
index 26f51e234..000000000
--- a/winsup/cygserver/aclocal.m4
+++ /dev/null
@@ -1,55 +0,0 @@
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the cygwin
-dnl configure.in files.
-
-AC_DEFUN([AC_CYGWIN_INCLUDES], [
-: ${ac_cv_prog_CXX:=$CXX}
-: ${ac_cv_prog_CC:=$CC}
-
-cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
-if test -z "$cygwin_headers"; then
-    AC_MSG_ERROR([cannot find $winsup_srcdir/cygwin/include directory])
-fi
-
-newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
-if test -z "$newlib_headers"; then
-    AC_MSG_ERROR([cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include])
-fi
-newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
-
-INCLUDES="-I${srcdir}/../cygwin -I${target_builddir}/winsup/cygwin"
-INCLUDES="${INCLUDES} -isystem ${cygwin_headers}"
-for h in ${newlib_headers}; do
-    INCLUDES="${INCLUDES} -isystem $h"
-done
-AC_SUBST(INCLUDES)
-])
-
-AC_DEFUN([AC_CONFIGURE_ARGS], [
-configure_args=X
-for f in $ac_configure_args; do
-    case "$f" in
- *--srcdir*) ;;
- *) configure_args="$configure_args $f" ;;
-    esac
-done
-configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
-AC_SUBST(configure_args)
-])
-
-AC_SUBST(target_builddir)
-AC_SUBST(winsup_srcdir)
-
diff --git a/winsup/cygserver/autogen.sh b/winsup/cygserver/autogen.sh
deleted file mode 100755
index dc2c8b70a..000000000
--- a/winsup/cygserver/autogen.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh -e
-/usr/bin/aclocal --system-acdir=..
-/usr/bin/autoconf -f
-exec /bin/rm -rf autom4te.cache
diff --git a/winsup/cygserver/configure b/winsup/cygserver/configure
deleted file mode 100755
index aa87be83d..000000000
--- a/winsup/cygserver/configure
+++ /dev/null
@@ -1,5231 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Cygwin Cygserver 0.
-#
-# Report bugs to <[hidden email]>.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
- /*)
-   for as_base in sh bash ksh sh5; do
-     # Try only shells that exist, to save several forks.
-     as_shell=$as_dir/$as_base
-     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell [hidden email] and [hidden email]
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='Cygwin Cygserver'
-PACKAGE_TARNAME='cygwin'
-PACKAGE_VERSION='0'
-PACKAGE_STRING='Cygwin Cygserver 0'
-PACKAGE_BUGREPORT='[hidden email]'
-PACKAGE_URL='https://cygwin.com'
-
-ac_unique_file="cygserver.cc"
-ac_no_link=no
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-configure_args
-WINDRES
-DLLTOOL
-NM
-LD
-RANLIB
-AS
-AR
-all_host
-INCLUDES
-CPP
-ac_ct_CXX
-CXXFLAGS
-CXX
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL
-winsup_srcdir
-target_builddir'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_debugging
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CXX
-CXXFLAGS
-CCC
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures Cygwin Cygserver 0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/cygwin]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-  --target=TARGET   configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of Cygwin Cygserver 0:";;
-   esac
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-option-checking  ignore unrecognized --enable/--with options
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
- --enable-debugging Build a cygwin DLL which has more consistency checking for debugging
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <[hidden email]>.
-Cygwin Cygserver home page: <https://cygwin.com>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-Cygwin Cygserver configure 0
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_cxx_try_compile LINENO
-# ----------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-    ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by Cygwin Cygserver $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
-      else
- case $ac_arg in
-  *=* | --config-cache | -C | -disable-* | --disable-* \
-  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-  | -with-* | --with-* | -without-* | --without-* | --x)
-    case "$ac_configure_args0 " in
-      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-    esac
-    ;;
-  -* ) ac_must_keep_next=true ;;
- esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-  ac_cache_corrupted=:
- else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-  eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_aux_dir=
-for ac_dir in .. "$srcdir"/..; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in .. \"$srcdir\"/.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-
-. ${srcdir}/../configure.cygwin
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-  if test $ac_prog = install &&
-    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-    # AIX install.  It has an incompatible calling convention.
-    :
-  elif test $ac_prog = install &&
-    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-    # program-specific install script used by HP pwplus--don't use.
-    :
-  else
-    rm -rf conftest.one conftest.two conftest.dir
-    echo one > conftest.one
-    echo two > conftest.two
-    mkdir conftest.dir
-    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-      test -s conftest.one && test -s conftest.two &&
-      test -s conftest.dir/conftest.one &&
-      test -s conftest.dir/conftest.two
-    then
-      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-      break 3
-    fi
-  fi
- fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  ac_no_link=no
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
-    [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
-    *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
-   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
-    * )
- break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-  break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-
-else
-  rm -f -r a.out a.exe b.out conftest.$ac_ext conftest.o conftest.obj conftest.dSYM
-  ac_no_link=yes
-  # Setting cross_compile will disable run tests; it will
-  # also disable AC_CHECK_FILE but that's generally
-  # correct if we can't link.
-  cross_compiling=yes
-  EXEEXT=
-  # Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
-  if test -n "$CCC"; then
-    CXX=$CCC
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CXX+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CXX+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CXX" && break
-done
-
-  if test "x$ac_ct_CXX" = x; then
-    CXX="g++"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CXX=$ac_ct_CXX
-  fi
-fi
-
-  fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if ${ac_cv_cxx_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GXX=yes
-else
-  GXX=
-fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if ${ac_cv_prog_cxx_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-   ac_cxx_werror_flag=yes
-   ac_cv_prog_cxx_g=no
-   CXXFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_cv_prog_cxx_g=yes
-else
-  CXXFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
-  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_cv_prog_cxx_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-: ${ac_cv_prog_CXX:=$CXX}
-: ${ac_cv_prog_CC:=$CC}
-
-cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
-if test -z "$cygwin_headers"; then
-    as_fn_error $? "cannot find $winsup_srcdir/cygwin/include directory" "$LINENO" 5
-fi
-
-newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
-if test -z "$newlib_headers"; then
-    as_fn_error $? "cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include" "$LINENO" 5
-fi
-newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
-
-INCLUDES="-I${srcdir}/../cygwin -I${target_builddir}/winsup/cygwin"
-INCLUDES="${INCLUDES} -isystem ${cygwin_headers}"
-for h in ${newlib_headers}; do
-    INCLUDES="${INCLUDES} -isystem $h"
-done
-
-
-
-case "$with_cross_host" in
-  ""|*cygwin*)
-    all_host="all_host"
-    ;;
-  *)
-    all_host=
-    ;;
-esac
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="ar"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AS+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AS="${ac_tool_prefix}as"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AS"; then
-  ac_ct_AS=$AS
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AS+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AS"; then
-  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AS="as"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AS" = x; then
-    AS="as"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AS=$ac_ct_AS
-  fi
-else
-  AS="$ac_cv_prog_AS"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB="ranlib"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ld; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$LD"; then
-  ac_cv_prog_LD="$LD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_LD="${ac_tool_prefix}ld"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-LD=$ac_cv_prog_LD
-if test -n "$LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LD"; then
-  ac_ct_LD=$LD
-  # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_LD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_LD"; then
-  ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_LD="ld"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LD=$ac_cv_prog_ac_ct_LD
-if test -n "$ac_ct_LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LD" >&5
-$as_echo "$ac_ct_LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_LD" = x; then
-    LD="ld"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    LD=$ac_ct_LD
-  fi
-else
-  LD="$ac_cv_prog_LD"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NM+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NM"; then
-  ac_cv_prog_NM="$NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_NM="${ac_tool_prefix}nm"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NM"; then
-  ac_ct_NM=$NM
-  # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NM+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NM"; then
-  ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_NM="nm"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NM=$ac_cv_prog_ac_ct_NM
-if test -n "$ac_ct_NM"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
-$as_echo "$ac_ct_NM" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_NM" = x; then
-    NM="nm"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NM=$ac_ct_NM
-  fi
-else
-  NM="$ac_cv_prog_NM"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DLLTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="dlltool"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DLLTOOL=$ac_ct_DLLTOOL
-  fi
-else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ac_tool_prefix}windres; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_WINDRES+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$WINDRES"; then
-  ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_WINDRES="${ac_tool_prefix}windres"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-WINDRES=$ac_cv_prog_WINDRES
-if test -n "$WINDRES"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINDRES" >&5
-$as_echo "$WINDRES" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_WINDRES"; then
-  ac_ct_WINDRES=$WINDRES
-  # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_WINDRES+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_WINDRES"; then
-  ac_cv_prog_ac_ct_WINDRES="$ac_ct_WINDRES" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_WINDRES="windres"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_WINDRES=$ac_cv_prog_ac_ct_WINDRES
-if test -n "$ac_ct_WINDRES"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDRES" >&5
-$as_echo "$ac_ct_WINDRES" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_WINDRES" = x; then
-    WINDRES="windres"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    WINDRES=$ac_ct_WINDRES
-  fi
-else
-  WINDRES="$ac_cv_prog_WINDRES"
-fi
-
-
-# Check whether --enable-debugging was given.
-if test "${enable_debugging+set}" = set; then :
-  enableval=$enable_debugging; case "${enableval}" in
-yes) $as_echo "#define DEBUGGING 1" >>confdefs.h
- ;;
-no) ;;
-esac
-
-fi
-
-
-
-configure_args=X
-for f in $ac_configure_args; do
-    case "$f" in
- *--srcdir*) ;;
- *) configure_args="$configure_args $f" ;;
-    esac
-done
-configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
-
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
- "s/'/'\\\\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-  mv -f confcache "$cache_file"$$ &&
-  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-  mv -f confcache "$cache_file" ;;
- esac
-      fi
-    fi
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by Cygwin Cygserver $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <[hidden email]>.
-Cygwin Cygserver home page: <https://cygwin.com>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-Cygwin Cygserver config.status 0
-configured by $0, generated by GNU Autoconf 2.69,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X "  :F $CONFIG_FILES      "
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute).  The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
-   case $ac_f in
-   [\\/$]*) false;;
-   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-   esac ||
-   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
-  esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/winsup/cygserver/configure.ac b/winsup/cygserver/configure.ac
deleted file mode 100644
index 4ff784e47..000000000
--- a/winsup/cygserver/configure.ac
+++ /dev/null
@@ -1,59 +0,0 @@
-dnl Autoconf configure script for Cygserver.
-dnl
-dnl This file is part of Cygwin.
-dnl
-dnl This software is a copyrighted work licensed under the terms of the
-dnl Cygwin license.  Please consult the file "CYGWIN_LICENSE" for
-dnl details.
-dnl
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.59])
-AC_INIT([Cygwin Cygserver],[0],[[hidden email]],[cygwin],[https://cygwin.com])
-AC_CONFIG_SRCDIR(cygserver.cc)
-AC_CONFIG_AUX_DIR(..)
-
-. ${srcdir}/../configure.cygwin
-
-AC_PROG_INSTALL
-AC_NO_EXECUTABLES
-AC_CANONICAL_TARGET
-
-AC_PROG_CC
-AC_PROG_CXX
-AC_PROG_CPP
-AC_LANG(C)
-AC_LANG(C++)
-
-AC_CYGWIN_INCLUDES
-
-case "$with_cross_host" in
-  ""|*cygwin*)
-    all_host="all_host"
-    ;;
-  *)
-    all_host=
-    ;;
-esac
-
-AC_SUBST(all_host)
-
-AC_CHECK_TOOL(AR, ar, ar)
-AC_CHECK_TOOL(AS, as, as)
-AC_CHECK_TOOL(RANLIB, ranlib, ranlib)
-AC_CHECK_TOOL(LD, ld, ld)
-AC_CHECK_TOOL(NM, nm, nm)
-AC_CHECK_TOOL(DLLTOOL, dlltool, dlltool)
-AC_CHECK_TOOL(WINDRES, windres, windres)
-
-AC_ARG_ENABLE(debugging,
-[ --enable-debugging Build a cygwin DLL which has more consistency checking for debugging],
-[case "${enableval}" in
-yes) AC_DEFINE(DEBUGGING) ;;
-no) ;;
-esac
-])
-
-AC_CONFIGURE_ARGS
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/winsup/cygwin/Makefile.in b/winsup/cygwin/Makefile.in
index dad526b74..9e986ca83 100644
--- a/winsup/cygwin/Makefile.in
+++ b/winsup/cygwin/Makefile.in
@@ -12,7 +12,6 @@
 srcdir:=@srcdir@
 target_builddir:=@target_builddir@
 winsup_srcdir:=@winsup_srcdir@
-configure_args=@configure_args@
 
 CFLAGS?=@CFLAGS@
 CXXFLAGS?=@CXXFLAGS@
@@ -696,10 +695,6 @@ $(TEST_LIB_NAME): $(LIB_NAME)
 $(LIBSERVER): ${cygserver_blddir}/Makefile
  $(MAKE) -C ${cygserver_blddir} libcygserver.a
 
-${cygserver_blddir}/Makefile:
- /bin/mkdir -p ${@D}
- cd ${@D} && exec /bin/sh $(dir ${srcdir})/cygserver/configure ${configure_args}
-
 dll_ofiles: $(DLL_OFILES)
 
 $(LIBGMON_A): $(GMON_OFILES) $(GMON_START)
@@ -776,9 +771,6 @@ version.cc: mkvers.sh include/cygwin/version.h winver.rc $(src_files)
  /bin/sh ${word 1,$^} ${word 2,$^} ${word 3,$^} $(WINDRES) ${CFLAGS} -I${srcdir}/include
 $(VERSION_OFILES): version.cc
 
-Makefile: ${srcdir}/Makefile.in
- /bin/sh ./config.status
-
 $(DEF_FILE) sigfe.s: gendef $(srcdir)/$(TLSOFFSETS_H) $(DIN_FILE)
  $(word 1,$^) --cpu=${target_cpu} --output-def=$(DEF_FILE) --tlsoffsets=$(word 2,$^) $(wordlist 3,4,$^)
 
diff --git a/winsup/cygwin/aclocal.m4 b/winsup/cygwin/aclocal.m4
deleted file mode 100644
index 77959ef37..000000000
--- a/winsup/cygwin/aclocal.m4
+++ /dev/null
@@ -1,54 +0,0 @@
-# generated automatically by aclocal 1.12.6 -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the cygwin
-dnl configure.in files.
-
-AC_DEFUN([AC_CYGWIN_INCLUDES], [
-: ${ac_cv_prog_CXX:=$CXX}
-: ${ac_cv_prog_CC:=$CC}
-
-cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
-if test -z "$cygwin_headers"; then
-    AC_MSG_ERROR([cannot find $winsup_srcdir/cygwin/include directory])
-fi
-
-newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
-if test -z "$newlib_headers"; then
-    AC_MSG_ERROR([cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include])
-fi
-newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
-
-INCLUDES="-I${srcdir}/../cygwin -I${target_builddir}/winsup/cygwin"
-INCLUDES="${INCLUDES} -isystem ${cygwin_headers}"
-for h in ${newlib_headers}; do
-    INCLUDES="${INCLUDES} -isystem $h"
-done
-AC_SUBST(INCLUDES)
-])
-
-AC_DEFUN([AC_CONFIGURE_ARGS], [
-configure_args=X
-for f in $ac_configure_args; do
-    case "$f" in
- *--srcdir*) ;;
- *) configure_args="$configure_args $f" ;;
-    esac
-done
-configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
-AC_SUBST(configure_args)
-])
-
-AC_SUBST(target_builddir)
-AC_SUBST(winsup_srcdir)
-
diff --git a/winsup/cygwin/autogen.sh b/winsup/cygwin/autogen.sh
deleted file mode 100755
index dc2c8b70a..000000000
--- a/winsup/cygwin/autogen.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh -e
-/usr/bin/aclocal --system-acdir=..
-/usr/bin/autoconf -f
-exec /bin/rm -rf autom4te.cache
diff --git a/winsup/cygwin/configure b/winsup/cygwin/configure
deleted file mode 100755
index 4665aee73..000000000
--- a/winsup/cygwin/configure
+++ /dev/null
@@ -1,5659 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Cygwin DLL 0.
-#
-# Report bugs to <[hidden email]>.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
- /*)
-   for as_base in sh bash ksh sh5; do
-     # Try only shells that exist, to save several forks.
-     as_shell=$as_dir/$as_base
-     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell [hidden email] and [hidden email]
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='Cygwin DLL'
-PACKAGE_TARNAME='cygwin'
-PACKAGE_VERSION='0'
-PACKAGE_STRING='Cygwin DLL 0'
-PACKAGE_BUGREPORT='[hidden email]'
-PACKAGE_URL='https://cygwin.com'
-
-ac_unique_file="Makefile.in"
-ac_no_link=no
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-TLSOFFSETS_H
-DIN_FILE
-DEF_DLL_ENTRY
-DLL_ENTRY
-DLL_NAME
-configure_args
-WINDRES
-STRIP
-RANLIB
-OBJDUMP
-OBJCOPY
-NM
-LD
-DLLTOOL
-AS
-AR
-all_host
-INCLUDES
-CPP
-ac_ct_CXX
-CXXFLAGS
-CXX
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL
-winsup_srcdir
-target_builddir'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_debugging
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CXX
-CXXFLAGS
-CCC
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures Cygwin DLL 0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/cygwin]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-  --target=TARGET   configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of Cygwin DLL 0:";;
-   esac
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-option-checking  ignore unrecognized --enable/--with options
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
- --enable-debugging Build a cygwin DLL which has more consistency checking for debugging
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <[hidden email]>.
-Cygwin DLL home page: <https://cygwin.com>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-Cygwin DLL configure 0
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_cxx_try_compile LINENO
-# ----------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-    ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by Cygwin DLL $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
-      else
- case $ac_arg in
-  *=* | --config-cache | -C | -disable-* | --disable-* \
-  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-  | -with-* | --with-* | -without-* | --without-* | --x)
-    case "$ac_configure_args0 " in
-      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-    esac
-    ;;
-  -* ) ac_must_keep_next=true ;;
- esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-  ac_cache_corrupted=:
- else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-  eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-ac_aux_dir=
-for ac_dir in .. "$srcdir"/..; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in .. \"$srcdir\"/.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-
-. ${srcdir}/../configure.cygwin
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-  if test $ac_prog = install &&
-    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-    # AIX install.  It has an incompatible calling convention.
-    :
-  elif test $ac_prog = install &&
-    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-    # program-specific install script used by HP pwplus--don't use.
-    :
-  else
-    rm -rf conftest.one conftest.two conftest.dir
-    echo one > conftest.one
-    echo two > conftest.two
-    mkdir conftest.dir
-    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-      test -s conftest.one && test -s conftest.two &&
-      test -s conftest.dir/conftest.one &&
-      test -s conftest.dir/conftest.two
-    then
-      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-      break 3
-    fi
-  fi
- fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  ac_no_link=no
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
-    [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
-    *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
-   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
-    * )
- break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-  break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-
-else
-  rm -f -r a.out a.exe b.out conftest.$ac_ext conftest.o conftest.obj conftest.dSYM
-  ac_no_link=yes
-  # Setting cross_compile will disable run tests; it will
-  # also disable AC_CHECK_FILE but that's generally
-  # correct if we can't link.
-  cross_compiling=yes
-  EXEEXT=
-  # Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
-  if test -n "$CCC"; then
-    CXX=$CCC
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CXX+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CXX+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CXX" && break
-done
-
-  if test "x$ac_ct_CXX" = x; then
-    CXX="g++"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CXX=$ac_ct_CXX
-  fi
-fi
-
-  fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if ${ac_cv_cxx_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GXX=yes
-else
-  GXX=
-fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if ${ac_cv_prog_cxx_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-   ac_cxx_werror_flag=yes
-   ac_cv_prog_cxx_g=no
-   CXXFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_cv_prog_cxx_g=yes
-else
-  CXXFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
-  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_cv_prog_cxx_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-
-: ${ac_cv_prog_CXX:=$CXX}
-: ${ac_cv_prog_CC:=$CC}
-
-cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
-if test -z "$cygwin_headers"; then
-    as_fn_error $? "cannot find $winsup_srcdir/cygwin/include directory" "$LINENO" 5
-fi
-
-newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
-if test -z "$newlib_headers"; then
-    as_fn_error $? "cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include" "$LINENO" 5
-fi
-newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
-
-INCLUDES="-I${srcdir}/../cygwin -I${target_builddir}/winsup/cygwin"
-INCLUDES="${INCLUDES} -isystem ${cygwin_headers}"
-for h in ${newlib_headers}; do
-    INCLUDES="${INCLUDES} -isystem $h"
-done
-
-
-
-case "$with_cross_host" in
-  ""|*cygwin*)
-    all_host="all_host"
-    ;;
-  *)
-    all_host=
-    ;;
-esac
-
-
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR="ar"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AS+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AS="${ac_tool_prefix}as"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AS"; then
-  ac_ct_AS=$AS
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AS+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AS"; then
-  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AS="as"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AS" = x; then
-    AS="as"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AS=$ac_ct_AS
-  fi
-else
-  AS="$ac_cv_prog_AS"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DLLTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="dlltool"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DLLTOOL=$ac_ct_DLLTOOL
-  fi
-else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ld; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$LD"; then
-  ac_cv_prog_LD="$LD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_LD="${ac_tool_prefix}ld"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-LD=$ac_cv_prog_LD
-if test -n "$LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LD"; then
-  ac_ct_LD=$LD
-  # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_LD+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_LD"; then
-  ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_LD="ld"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LD=$ac_cv_prog_ac_ct_LD
-if test -n "$ac_ct_LD"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LD" >&5
-$as_echo "$ac_ct_LD" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_LD" = x; then
-    LD="ld"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    LD=$ac_ct_LD
-  fi
-else
-  LD="$ac_cv_prog_LD"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NM+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NM"; then
-  ac_cv_prog_NM="$NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_NM="${ac_tool_prefix}nm"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-NM=$ac_cv_prog_NM
-if test -n "$NM"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
-$as_echo "$NM" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NM"; then
-  ac_ct_NM=$NM
-  # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NM+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NM"; then
-  ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_NM="nm"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NM=$ac_cv_prog_ac_ct_NM
-if test -n "$ac_ct_NM"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
-$as_echo "$ac_ct_NM" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_NM" = x; then
-    NM="nm"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NM=$ac_ct_NM
-  fi
-else
-  NM="$ac_cv_prog_NM"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objcopy; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJCOPY+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OBJCOPY"; then
-  ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJCOPY=$ac_cv_prog_OBJCOPY
-if test -n "$OBJCOPY"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY" >&5
-$as_echo "$OBJCOPY" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJCOPY"; then
-  ac_ct_OBJCOPY=$OBJCOPY
-  # Extract the first word of "objcopy", so it can be a program name with args.
-set dummy objcopy; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJCOPY+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OBJCOPY"; then
-  ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_OBJCOPY="objcopy"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY
-if test -n "$ac_ct_OBJCOPY"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJCOPY" >&5
-$as_echo "$ac_ct_OBJCOPY" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OBJCOPY" = x; then
-    OBJCOPY="objcopy"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJCOPY=$ac_ct_OBJCOPY
-  fi
-else
-  OBJCOPY="$ac_cv_prog_OBJCOPY"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="objdump"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    OBJDUMP=$ac_ct_OBJDUMP
-  fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB="ranlib"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP="strip"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ac_tool_prefix}windres; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_WINDRES+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$WINDRES"; then
-  ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_WINDRES="${ac_tool_prefix}windres"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-WINDRES=$ac_cv_prog_WINDRES
-if test -n "$WINDRES"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINDRES" >&5
-$as_echo "$WINDRES" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_WINDRES"; then
-  ac_ct_WINDRES=$WINDRES
-  # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_WINDRES+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_WINDRES"; then
-  ac_cv_prog_ac_ct_WINDRES="$ac_ct_WINDRES" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_WINDRES="windres"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_WINDRES=$ac_cv_prog_ac_ct_WINDRES
-if test -n "$ac_ct_WINDRES"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDRES" >&5
-$as_echo "$ac_ct_WINDRES" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_WINDRES" = x; then
-    WINDRES="windres"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    WINDRES=$ac_ct_WINDRES
-  fi
-else
-  WINDRES="$ac_cv_prog_WINDRES"
-fi
-
-
-# Check whether --enable-debugging was given.
-if test "${enable_debugging+set}" = set; then :
-  enableval=$enable_debugging; case "${enableval}" in
-yes)
-$as_echo "#define DEBUGGING 1" >>confdefs.h
- ;;
-no) ;;
-esac
-
-fi
-
-
-case "$target_cpu" in
-   i?86)
- DLL_NAME="cygwin1.dll"
- DLL_ENTRY="_dll_entry@12"
- DEF_DLL_ENTRY="dll_entry@12"
- DIN_FILE="i686.din"
- TLSOFFSETS_H="tlsoffsets.h"
- ;;
-   x86_64)
- DLL_NAME="cygwin1.dll"
- DLL_ENTRY="dll_entry"
- DEF_DLL_ENTRY="dll_entry"
- DIN_FILE="x86_64.din"
- TLSOFFSETS_H="tlsoffsets64.h"
- ;;
-   *) as_fn_error $? "Invalid target processor \"$target_cpu\"" "$LINENO" 5 ;;
-esac
-
-
-configure_args=X
-for f in $ac_configure_args; do
-    case "$f" in
- *--srcdir*) ;;
- *) configure_args="$configure_args $f" ;;
-    esac
-done
-configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
-
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
- "s/'/'\\\\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-  mv -f confcache "$cache_file"$$ &&
-  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-  mv -f confcache "$cache_file" ;;
- esac
-      fi
-    fi
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by Cygwin DLL $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-      --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to <[hidden email]>.
-Cygwin DLL home page: <https://cygwin.com>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-Cygwin DLL config.status 0
-configured by $0, generated by GNU Autoconf 2.69,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
-  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
-  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_tt"; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any.  Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  for (key in D) D_is_set[key] = 1
-  FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
-  line = \$ 0
-  split(line, arg, " ")
-  if (arg[1] == "#") {
-    defundef = arg[2]
-    mac1 = arg[3]
-  } else {
-    defundef = substr(arg[1], 2)
-    mac1 = arg[2]
-  }
-  split(mac1, mac2, "(") #)
-  macro = mac2[1]
-  prefix = substr(line, 1, index(line, defundef) - 1)
-  if (D_is_set[macro]) {
-    # Preserve the white space surrounding the "#".
-    print prefix "define", macro P[macro] D[macro]
-    next
-  } else {
-    # Replace #undef with comments.  This is necessary, for example,
-    # in the case of _POSIX_SOURCE, which is predefined and required
-    # on some systems where configure will not decide to define it.
-    if (defundef == "undef") {
-      print "/*", prefix defundef, macro, "*/"
-      next
-    }
-  }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    "
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute).  The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
-   case $ac_f in
-   [\\/$]*) false;;
-   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-   esac ||
-   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
-  if test x"$ac_file" != x-; then
-    {
-      $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
-    } >"$ac_tmp/config.h" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      rm -f "$ac_file"
-      mv "$ac_tmp/config.h" "$ac_file" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    fi
-  else
-    $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error $? "could not create -" "$LINENO" 5
-  fi
- ;;
-
-
-  esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/winsup/cygwin/configure.ac b/winsup/cygwin/configure.ac
deleted file mode 100644
index aafc4d925..000000000
--- a/winsup/cygwin/configure.ac
+++ /dev/null
@@ -1,87 +0,0 @@
-dnl Autoconf configure script for Cygwin.
-dnl
-dnl This file is part of Cygwin.
-dnl
-dnl This software is a copyrighted work licensed under the terms of the
-dnl Cygwin license.  Please consult the file "CYGWIN_LICENSE" for
-dnl details.
-dnl
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.59])
-AC_INIT([Cygwin DLL],[0],[[hidden email]],[cygwin],[https://cygwin.com])
-AC_CONFIG_SRCDIR(Makefile.in)
-AC_CONFIG_HEADER(config.h)
-AC_CONFIG_AUX_DIR(..)
-
-. ${srcdir}/../configure.cygwin
-
-AC_PROG_INSTALL
-AC_NO_EXECUTABLES
-AC_CANONICAL_TARGET
-
-AC_PROG_CC
-AC_PROG_CXX
-AC_PROG_CPP
-AC_LANG(C)
-
-AC_LANG(C++)
-
-AC_CYGWIN_INCLUDES
-
-case "$with_cross_host" in
-  ""|*cygwin*)
-    all_host="all_host"
-    ;;
-  *)
-    all_host=
-    ;;
-esac
-
-AC_SUBST(all_host)
-
-AC_CHECK_TOOL(AR, ar, ar)
-AC_CHECK_TOOL(AS, as, as)
-AC_CHECK_TOOL(DLLTOOL, dlltool, dlltool)
-AC_CHECK_TOOL(LD, ld, ld)
-AC_CHECK_TOOL(NM, nm, nm)
-AC_CHECK_TOOL(OBJCOPY, objcopy, objcopy)
-AC_CHECK_TOOL(OBJDUMP, objdump, objdump)
-AC_CHECK_TOOL(RANLIB, ranlib, ranlib)
-AC_CHECK_TOOL(STRIP, strip, strip)
-AC_CHECK_TOOL(WINDRES, windres, windres)
-
-AC_ARG_ENABLE(debugging,
-[ --enable-debugging Build a cygwin DLL which has more consistency checking for debugging],
-[case "${enableval}" in
-yes) AC_DEFINE([DEBUGGING],[1],[Define if DEBUGGING support is requested.]) ;;
-no) ;;
-esac
-])
-
-case "$target_cpu" in
-   i?86)
- DLL_NAME="cygwin1.dll"
- DLL_ENTRY="_dll_entry@12"
- DEF_DLL_ENTRY="dll_entry@12"
- DIN_FILE="i686.din"
- TLSOFFSETS_H="tlsoffsets.h"
- ;;
-   x86_64)
- DLL_NAME="cygwin1.dll"
- DLL_ENTRY="dll_entry"
- DEF_DLL_ENTRY="dll_entry"
- DIN_FILE="x86_64.din"
- TLSOFFSETS_H="tlsoffsets64.h"
- ;;
-   *) AC_MSG_ERROR([Invalid target processor "$target_cpu"]) ;;
-esac
-
-AC_CONFIGURE_ARGS
-AC_SUBST(DLL_NAME)
-AC_SUBST(DLL_ENTRY)
-AC_SUBST(DEF_DLL_ENTRY)
-AC_SUBST(DIN_FILE)
-AC_SUBST(TLSOFFSETS_H)
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/winsup/doc/Makefile.in b/winsup/doc/Makefile.in
index cb46a91cf..cc4a1bec3 100644
--- a/winsup/doc/Makefile.in
+++ b/winsup/doc/Makefile.in
@@ -54,9 +54,6 @@ all: Makefile Makefile.dep \
  intro2man.stamp \
  cygwin-ug-net.info cygwin-api.info
 
-Makefile: $(srcdir)/Makefile.in
- /bin/sh ./config.status
-
 clean:
  rm -f Makefile.dep
  rm -f *.html *.html.gz
diff --git a/winsup/doc/configure b/winsup/doc/configure
deleted file mode 100755
index eeaa312f5..000000000
--- a/winsup/doc/configure
+++ /dev/null
@@ -1,4064 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Cygwin Documentation 0.
-#
-# Report bugs to <[hidden email]>.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
- /*)
-   for as_base in sh bash ksh sh5; do
-     # Try only shells that exist, to save several forks.
-     as_shell=$as_dir/$as_base
-     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell [hidden email] and [hidden email]
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='Cygwin Documentation'
-PACKAGE_TARNAME='cygwin'
-PACKAGE_VERSION='0'
-PACKAGE_STRING='Cygwin Documentation 0'
-PACKAGE_BUGREPORT='[hidden email]'
-PACKAGE_URL='https://cygwin.com'
-
-ac_unique_file="cygwin-api.xml"
-ac_no_link=no
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-build_exeext
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-DOCBOOK2XTEXI
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures Cygwin Documentation 0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/cygwin]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-  --target=TARGET   configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of Cygwin Documentation 0:";;
-   esac
-  cat <<\_ACEOF
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <[hidden email]>.
-Cygwin Documentation home page: <https://cygwin.com>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-Cygwin Documentation configure 0
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by Cygwin Documentation $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
-      else
- case $ac_arg in
-  *=* | --config-cache | -C | -disable-* | --disable-* \
-  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-  | -with-* | --with-* | -without-* | --without-* | --x)
-    case "$ac_configure_args0 " in
-      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-    esac
-    ;;
-  -* ) ac_must_keep_next=true ;;
- esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-  ac_cache_corrupted=:
- else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-  eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_aux_dir=
-for ac_dir in ../.. "$srcdir"/../..; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../.. \"$srcdir\"/../.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
-  ./ | .// | /[cC]/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
-  if test $ac_prog = install &&
-    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-    # AIX install.  It has an incompatible calling convention.
-    :
-  elif test $ac_prog = install &&
-    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-    # program-specific install script used by HP pwplus--don't use.
-    :
-  else
-    rm -rf conftest.one conftest.two conftest.dir
-    echo one > conftest.one
-    echo two > conftest.two
-    mkdir conftest.dir
-    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-      test -s conftest.one && test -s conftest.two &&
-      test -s conftest.dir/conftest.one &&
-      test -s conftest.dir/conftest.two
-    then
-      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-      break 3
-    fi
-  fi
- fi
-      done
-    done
-    ;;
-esac
-
-  done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-for ac_prog in docbook2x-texi db2x_docbook2texi
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DOCBOOK2XTEXI+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DOCBOOK2XTEXI"; then
-  ac_cv_prog_DOCBOOK2XTEXI="$DOCBOOK2XTEXI" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_DOCBOOK2XTEXI="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-DOCBOOK2XTEXI=$ac_cv_prog_DOCBOOK2XTEXI
-if test -n "$DOCBOOK2XTEXI"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOCBOOK2XTEXI" >&5
-$as_echo "$DOCBOOK2XTEXI" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$DOCBOOK2XTEXI" && break
-done
-test -n "$DOCBOOK2XTEXI" || DOCBOOK2XTEXI="true"
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then
-  ac_no_link=no
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
-    [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
-    *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
-   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
-    * )
- break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-  break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-
-else
-  rm -f -r a.out a.exe b.out conftest.$ac_ext conftest.o conftest.obj conftest.dSYM
-  ac_no_link=yes
-  # Setting cross_compile will disable run tests; it will
-  # also disable AC_CHECK_FILE but that's generally
-  # correct if we can't link.
-  cross_compiling=yes
-  EXEEXT=
-  # Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
- "s/'/'\\\\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-  mv -f confcache "$cache_file"$$ &&
-  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-  mv -f confcache "$cache_file" ;;
- esac
-      fi
-    fi
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by Cygwin Documentation $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <[hidden email]>.
-Cygwin Documentation home page: <https://cygwin.com>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-Cygwin Documentation config.status 0
-configured by $0, generated by GNU Autoconf 2.69,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X "  :F $CONFIG_FILES      "
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute).  The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
-   case $ac_f in
-   [\\/$]*) false;;
-   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-   esac ||
-   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
-  esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/winsup/doc/configure.ac b/winsup/doc/configure.ac
deleted file mode 100644
index 32e52415a..000000000
--- a/winsup/doc/configure.ac
+++ /dev/null
@@ -1,24 +0,0 @@
-dnl Autoconf configure script for winsup/doc
-dnl
-dnl This file is part of Cygwin.
-dnl
-dnl This software is a copyrighted work licensed under the terms of the
-dnl Cygwin license.  Please consult the file "CYGWIN_LICENSE" for
-dnl details.
-
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.59])
-AC_INIT([Cygwin Documentation],[0],[[hidden email]],[cygwin],[https://cygwin.com])
-AC_CONFIG_SRCDIR(cygwin-api.xml)
-AC_CONFIG_AUX_DIR(../..)
-
-AC_PROG_INSTALL
-AC_CHECK_PROGS([DOCBOOK2XTEXI], [docbook2x-texi db2x_docbook2texi], [true])
-AC_NO_EXECUTABLES
-AC_CANONICAL_TARGET
-
-AC_PROG_CC
-
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/winsup/testsuite/aclocal.m4 b/winsup/testsuite/aclocal.m4
deleted file mode 100644
index 177c0134b..000000000
--- a/winsup/testsuite/aclocal.m4
+++ /dev/null
@@ -1,831 +0,0 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
-
-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-# lib-prefix.m4 serial 4 (gettext-0.14.2)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
-  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
-  AC_REQUIRE([AC_PROG_CC])
-  AC_REQUIRE([AC_CANONICAL_HOST])
-  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-  dnl By default, look in $includedir and $libdir.
-  use_additional=yes
-  AC_LIB_WITH_FINAL_PREFIX([
-    eval additional_includedir=\"$includedir\"
-    eval additional_libdir=\"$libdir\"
-  ])
-  AC_LIB_ARG_WITH([lib-prefix],
-[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
-  --without-lib-prefix    don't search for libraries in includedir and libdir],
-[
-    if test "X$withval" = "Xno"; then
-      use_additional=no
-    else
-      if test "X$withval" = "X"; then
-        AC_LIB_WITH_FINAL_PREFIX([
-          eval additional_includedir=\"$includedir\"
-          eval additional_libdir=\"$libdir\"
-        ])
-      else
-        additional_includedir="$withval/include"
-        additional_libdir="$withval/lib"
-      fi
-    fi
-])
-  if test $use_additional = yes; then
-    dnl Potentially add $additional_includedir to $CPPFLAGS.
-    dnl But don't add it
-    dnl   1. if it's the standard /usr/include,
-    dnl   2. if it's already present in $CPPFLAGS,
-    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
-    dnl   4. if it doesn't exist as a directory.
-    if test "X$additional_includedir" != "X/usr/include"; then
-      haveit=
-      for x in $CPPFLAGS; do
-        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-        if test "X$x" = "X-I$additional_includedir"; then
-          haveit=yes
-          break
-        fi
-      done
-      if test -z "$haveit"; then
-        if test "X$additional_includedir" = "X/usr/local/include"; then
-          if test -n "$GCC"; then
-            case $host_os in
-              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-            esac
-          fi
-        fi
-        if test -z "$haveit"; then
-          if test -d "$additional_includedir"; then
-            dnl Really add $additional_includedir to $CPPFLAGS.
-            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
-          fi
-        fi
-      fi
-    fi
-    dnl Potentially add $additional_libdir to $LDFLAGS.
-    dnl But don't add it
-    dnl   1. if it's the standard /usr/lib,
-    dnl   2. if it's already present in $LDFLAGS,
-    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
-    dnl   4. if it doesn't exist as a directory.
-    if test "X$additional_libdir" != "X/usr/lib"; then
-      haveit=
-      for x in $LDFLAGS; do
-        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-        if test "X$x" = "X-L$additional_libdir"; then
-          haveit=yes
-          break
-        fi
-      done
-      if test -z "$haveit"; then
-        if test "X$additional_libdir" = "X/usr/local/lib"; then
-          if test -n "$GCC"; then
-            case $host_os in
-              linux*) haveit=yes;;
-            esac
-          fi
-        fi
-        if test -z "$haveit"; then
-          if test -d "$additional_libdir"; then
-            dnl Really add $additional_libdir to $LDFLAGS.
-            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
-          fi
-        fi
-      fi
-    fi
-  fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
-  dnl Unfortunately, prefix and exec_prefix get only finally determined
-  dnl at the end of configure.
-  if test "X$prefix" = "XNONE"; then
-    acl_final_prefix="$ac_default_prefix"
-  else
-    acl_final_prefix="$prefix"
-  fi
-  if test "X$exec_prefix" = "XNONE"; then
-    acl_final_exec_prefix='${prefix}'
-  else
-    acl_final_exec_prefix="$exec_prefix"
-  fi
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
-  prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  $1
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-])
-
-# lib-link.m4 serial 6 (gettext-0.14.3)
-dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ(2.50)
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
-  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-  AC_REQUIRE([AC_LIB_RPATH])
-  define([Name],[translit([$1],[./-], [___])])
-  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
-    AC_LIB_LINKFLAGS_BODY([$1], [$2])
-    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
-    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
-    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
-  ])
-  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
-  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
-  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
-  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-  AC_SUBST([LIB]NAME)
-  AC_SUBST([LTLIB]NAME)
-  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
-  dnl results of this search when this library appears as a dependency.
-  HAVE_LIB[]NAME=yes
-  undefine([Name])
-  undefine([NAME])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. If found, it
-dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
-dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
-  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
-  AC_REQUIRE([AC_LIB_RPATH])
-  define([Name],[translit([$1],[./-], [___])])
-  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
-  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
-  dnl accordingly.
-  AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
-  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
-  dnl because if the user has installed lib[]Name and not disabled its use
-  dnl via --without-lib[]Name-prefix, he wants to use it.
-  ac_save_CPPFLAGS="$CPPFLAGS"
-  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
-  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
-    ac_save_LIBS="$LIBS"
-    LIBS="$LIBS $LIB[]NAME"
-    AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
-    LIBS="$ac_save_LIBS"
-  ])
-  if test "$ac_cv_lib[]Name" = yes; then
-    HAVE_LIB[]NAME=yes
-    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
-    AC_MSG_CHECKING([how to link with lib[]$1])
-    AC_MSG_RESULT([$LIB[]NAME])
-  else
-    HAVE_LIB[]NAME=no
-    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
-    dnl $INC[]NAME either.
-    CPPFLAGS="$ac_save_CPPFLAGS"
-    LIB[]NAME=
-    LTLIB[]NAME=
-  fi
-  AC_SUBST([HAVE_LIB]NAME)
-  AC_SUBST([LIB]NAME)
-  AC_SUBST([LTLIB]NAME)
-  undefine([Name])
-  undefine([NAME])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-dnl hardcode_direct, hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
-  dnl Tell automake >= 1.10 to complain if config.rpath is missing.
-  m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
-  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
-  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
-  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
-  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
-  AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
-    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
-    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
-    . ./conftest.sh
-    rm -f ./conftest.sh
-    acl_cv_rpath=done
-  ])
-  wl="$acl_cv_wl"
-  libext="$acl_cv_libext"
-  shlibext="$acl_cv_shlibext"
-  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
-  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
-  hardcode_direct="$acl_cv_hardcode_direct"
-  hardcode_minus_L="$acl_cv_hardcode_minus_L"
-  dnl Determine whether the user wants rpath handling at all.
-  AC_ARG_ENABLE(rpath,
-    [  --disable-rpath         do not hardcode runtime library paths],
-    :, enable_rpath=yes)
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
-  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
-                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-  dnl By default, look in $includedir and $libdir.
-  use_additional=yes
-  AC_LIB_WITH_FINAL_PREFIX([
-    eval additional_includedir=\"$includedir\"
-    eval additional_libdir=\"$libdir\"
-  ])
-  AC_LIB_ARG_WITH([lib$1-prefix],
-[  --with-lib$1-prefix[=DIR]  search for lib$1 in DIR/include and DIR/lib
-  --without-lib$1-prefix     don't search for lib$1 in includedir and libdir],
-[
-    if test "X$withval" = "Xno"; then
-      use_additional=no
-    else
-      if test "X$withval" = "X"; then
-        AC_LIB_WITH_FINAL_PREFIX([
-          eval additional_includedir=\"$includedir\"
-          eval additional_libdir=\"$libdir\"
-        ])
-      else
-        additional_includedir="$withval/include"
-        additional_libdir="$withval/lib"
-      fi
-    fi
-])
-  dnl Search the library and its dependencies in $additional_libdir and
-  dnl $LDFLAGS. Using breadth-first-seach.
-  LIB[]NAME=
-  LTLIB[]NAME=
-  INC[]NAME=
-  rpathdirs=
-  ltrpathdirs=
-  names_already_handled=
-  names_next_round='$1 $2'
-  while test -n "$names_next_round"; do
-    names_this_round="$names_next_round"
-    names_next_round=
-    for name in $names_this_round; do
-      already_handled=
-      for n in $names_already_handled; do
-        if test "$n" = "$name"; then
-          already_handled=yes
-          break
-        fi
-      done
-      if test -z "$already_handled"; then
-        names_already_handled="$names_already_handled $name"
-        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
-        dnl or AC_LIB_HAVE_LINKFLAGS call.
-        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
-        eval value=\"\$HAVE_LIB$uppername\"
-        if test -n "$value"; then
-          if test "$value" = yes; then
-            eval value=\"\$LIB$uppername\"
-            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
-            eval value=\"\$LTLIB$uppername\"
-            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
-          else
-            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
-            dnl that this library doesn't exist. So just drop it.
-            :
-          fi
-        else
-          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
-          dnl and the already constructed $LIBNAME/$LTLIBNAME.
-          found_dir=
-          found_la=
-          found_so=
-          found_a=
-          if test $use_additional = yes; then
-            if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
-              found_dir="$additional_libdir"
-              found_so="$additional_libdir/lib$name.$shlibext"
-              if test -f "$additional_libdir/lib$name.la"; then
-                found_la="$additional_libdir/lib$name.la"
-              fi
-            else
-              if test -f "$additional_libdir/lib$name.$libext"; then
-                found_dir="$additional_libdir"
-                found_a="$additional_libdir/lib$name.$libext"
-                if test -f "$additional_libdir/lib$name.la"; then
-                  found_la="$additional_libdir/lib$name.la"
-                fi
-              fi
-            fi
-          fi
-          if test "X$found_dir" = "X"; then
-            for x in $LDFLAGS $LTLIB[]NAME; do
-              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-              case "$x" in
-                -L*)
-                  dir=`echo "X$x" | sed -e 's/^X-L//'`
-                  if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
-                    found_dir="$dir"
-                    found_so="$dir/lib$name.$shlibext"
-                    if test -f "$dir/lib$name.la"; then
-                      found_la="$dir/lib$name.la"
-                    fi
-                  else
-                    if test -f "$dir/lib$name.$libext"; then
-                      found_dir="$dir"
-                      found_a="$dir/lib$name.$libext"
-                      if test -f "$dir/lib$name.la"; then
-                        found_la="$dir/lib$name.la"
-                      fi
-                    fi
-                  fi
-                  ;;
-              esac
-              if test "X$found_dir" != "X"; then
-                break
-              fi
-            done
-          fi
-          if test "X$found_dir" != "X"; then
-            dnl Found the library.
-            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
-            if test "X$found_so" != "X"; then
-              dnl Linking with a shared library. We attempt to hardcode its
-              dnl directory into the executable's runpath, unless it's the
-              dnl standard /usr/lib.
-              if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
-                dnl No hardcoding is needed.
-                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-              else
-                dnl Use an explicit option to hardcode DIR into the resulting
-                dnl binary.
-                dnl Potentially add DIR to ltrpathdirs.
-                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-                haveit=
-                for x in $ltrpathdirs; do
-                  if test "X$x" = "X$found_dir"; then
-                    haveit=yes
-                    break
-                  fi
-                done
-                if test -z "$haveit"; then
-                  ltrpathdirs="$ltrpathdirs $found_dir"
-                fi
-                dnl The hardcoding into $LIBNAME is system dependent.
-                if test "$hardcode_direct" = yes; then
-                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
-                  dnl resulting binary.
-                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-                else
-                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
-                    dnl Use an explicit option to hardcode DIR into the resulting
-                    dnl binary.
-                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-                    dnl Potentially add DIR to rpathdirs.
-                    dnl The rpathdirs will be appended to $LIBNAME at the end.
-                    haveit=
-                    for x in $rpathdirs; do
-                      if test "X$x" = "X$found_dir"; then
-                        haveit=yes
-                        break
-                      fi
-                    done
-                    if test -z "$haveit"; then
-                      rpathdirs="$rpathdirs $found_dir"
-                    fi
-                  else
-                    dnl Rely on "-L$found_dir".
-                    dnl But don't add it if it's already contained in the LDFLAGS
-                    dnl or the already constructed $LIBNAME
-                    haveit=
-                    for x in $LDFLAGS $LIB[]NAME; do
-                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                      if test "X$x" = "X-L$found_dir"; then
-                        haveit=yes
-                        break
-                      fi
-                    done
-                    if test -z "$haveit"; then
-                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
-                    fi
-                    if test "$hardcode_minus_L" != no; then
-                      dnl FIXME: Not sure whether we should use
-                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-                      dnl here.
-                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
-                    else
-                      dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
-                      dnl here, because this doesn't fit in flags passed to the
-                      dnl compiler. So give up. No hardcoding. This affects only
-                      dnl very old systems.
-                      dnl FIXME: Not sure whether we should use
-                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
-                      dnl here.
-                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-                    fi
-                  fi
-                fi
-              fi
-            else
-              if test "X$found_a" != "X"; then
-                dnl Linking with a static library.
-                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
-              else
-                dnl We shouldn't come here, but anyway it's good to have a
-                dnl fallback.
-                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
-              fi
-            fi
-            dnl Assume the include files are nearby.
-            additional_includedir=
-            case "$found_dir" in
-              */lib | */lib/)
-                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
-                additional_includedir="$basedir/include"
-                ;;
-            esac
-            if test "X$additional_includedir" != "X"; then
-              dnl Potentially add $additional_includedir to $INCNAME.
-              dnl But don't add it
-              dnl   1. if it's the standard /usr/include,
-              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
-              dnl   3. if it's already present in $CPPFLAGS or the already
-              dnl      constructed $INCNAME,
-              dnl   4. if it doesn't exist as a directory.
-              if test "X$additional_includedir" != "X/usr/include"; then
-                haveit=
-                if test "X$additional_includedir" = "X/usr/local/include"; then
-                  if test -n "$GCC"; then
-                    case $host_os in
-                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-                    esac
-                  fi
-                fi
-                if test -z "$haveit"; then
-                  for x in $CPPFLAGS $INC[]NAME; do
-                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                    if test "X$x" = "X-I$additional_includedir"; then
-                      haveit=yes
-                      break
-                    fi
-                  done
-                  if test -z "$haveit"; then
-                    if test -d "$additional_includedir"; then
-                      dnl Really add $additional_includedir to $INCNAME.
-                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
-                    fi
-                  fi
-                fi
-              fi
-            fi
-            dnl Look for dependencies.
-            if test -n "$found_la"; then
-              dnl Read the .la file. It defines the variables
-              dnl dlname, library_names, old_library, dependency_libs, current,
-              dnl age, revision, installed, dlopen, dlpreopen, libdir.
-              save_libdir="$libdir"
-              case "$found_la" in
-                */* | *\\*) . "$found_la" ;;
-                *) . "./$found_la" ;;
-              esac
-              libdir="$save_libdir"
-              dnl We use only dependency_libs.
-              for dep in $dependency_libs; do
-                case "$dep" in
-                  -L*)
-                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
-                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
-                    dnl But don't add it
-                    dnl   1. if it's the standard /usr/lib,
-                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
-                    dnl   3. if it's already present in $LDFLAGS or the already
-                    dnl      constructed $LIBNAME,
-                    dnl   4. if it doesn't exist as a directory.
-                    if test "X$additional_libdir" != "X/usr/lib"; then
-                      haveit=
-                      if test "X$additional_libdir" = "X/usr/local/lib"; then
-                        if test -n "$GCC"; then
-                          case $host_os in
-                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
-                          esac
-                        fi
-                      fi
-                      if test -z "$haveit"; then
-                        haveit=
-                        for x in $LDFLAGS $LIB[]NAME; do
-                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                          if test "X$x" = "X-L$additional_libdir"; then
-                            haveit=yes
-                            break
-                          fi
-                        done
-                        if test -z "$haveit"; then
-                          if test -d "$additional_libdir"; then
-                            dnl Really add $additional_libdir to $LIBNAME.
-                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
-                          fi
-                        fi
-                        haveit=
-                        for x in $LDFLAGS $LTLIB[]NAME; do
-                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-                          if test "X$x" = "X-L$additional_libdir"; then
-                            haveit=yes
-                            break
-                          fi
-                        done
-                        if test -z "$haveit"; then
-                          if test -d "$additional_libdir"; then
-                            dnl Really add $additional_libdir to $LTLIBNAME.
-                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
-                          fi
-                        fi
-                      fi
-                    fi
-                    ;;
-                  -R*)
-                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
-                    if test "$enable_rpath" != no; then
-                      dnl Potentially add DIR to rpathdirs.
-                      dnl The rpathdirs will be appended to $LIBNAME at the end.
-                      haveit=
-                      for x in $rpathdirs; do
-                        if test "X$x" = "X$dir"; then
-                          haveit=yes
-                          break
-                        fi
-                      done
-                      if test -z "$haveit"; then
-                        rpathdirs="$rpathdirs $dir"
-                      fi
-                      dnl Potentially add DIR to ltrpathdirs.
-                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
-                      haveit=
-                      for x in $ltrpathdirs; do
-                        if test "X$x" = "X$dir"; then
-                          haveit=yes
-                          break
-                        fi
-                      done
-                      if test -z "$haveit"; then
-                        ltrpathdirs="$ltrpathdirs $dir"
-                      fi
-                    fi
-                    ;;
-                  -l*)
-                    dnl Handle this in the next round.
-                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
-                    ;;
-                  *.la)
-                    dnl Handle this in the next round. Throw away the .la's
-                    dnl directory; it is already contained in a preceding -L
-                    dnl option.
-                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
-                    ;;
-                  *)
-                    dnl Most likely an immediate library name.
-                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
-                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
-                    ;;
-                esac
-              done
-            fi
-          else
-            dnl Didn't find the library; assume it is in the system directories
-            dnl known to the linker and runtime loader. (All the system
-            dnl directories known to the linker should also be known to the
-            dnl runtime loader, otherwise the system is severely misconfigured.)
-            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
-            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
-          fi
-        fi
-      fi
-    done
-  done
-  if test "X$rpathdirs" != "X"; then
-    if test -n "$hardcode_libdir_separator"; then
-      dnl Weird platform: only the last -rpath option counts, the user must
-      dnl pass all path elements in one option. We can arrange that for a
-      dnl single library, but not when more than one $LIBNAMEs are used.
-      alldirs=
-      for found_dir in $rpathdirs; do
-        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
-      done
-      dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
-      acl_save_libdir="$libdir"
-      libdir="$alldirs"
-      eval flag=\"$hardcode_libdir_flag_spec\"
-      libdir="$acl_save_libdir"
-      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-    else
-      dnl The -rpath options are cumulative.
-      for found_dir in $rpathdirs; do
-        acl_save_libdir="$libdir"
-        libdir="$found_dir"
-        eval flag=\"$hardcode_libdir_flag_spec\"
-        libdir="$acl_save_libdir"
-        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
-      done
-    fi
-  fi
-  if test "X$ltrpathdirs" != "X"; then
-    dnl When using libtool, the option that works for both libraries and
-    dnl executables is -R. The -R options are cumulative.
-    for found_dir in $ltrpathdirs; do
-      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
-    done
-  fi
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
-  for element in [$2]; do
-    haveit=
-    for x in $[$1]; do
-      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
-      if test "X$x" = "X$element"; then
-        haveit=yes
-        break
-      fi
-    done
-    if test -z "$haveit"; then
-      [$1]="${[$1]}${[$1]:+ }$element"
-    fi
-  done
-])
-
-# lib-ld.m4 serial 3 (gettext-0.13)
-dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  acl_cv_prog_gnu_ld=yes ;;
-*)
-  acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]* | [A-Za-z]:[\\/]*)]
-      [re_direlt='/[^/][^/]*/\.\./']
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(acl_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      acl_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
-      *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
-      *)
- test "$with_gnu_ld" != yes && break ;;
-      esac
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
-
diff --git a/winsup/testsuite/configure b/winsup/testsuite/configure
deleted file mode 100755
index da4616582..000000000
--- a/winsup/testsuite/configure
+++ /dev/null
@@ -1,3950 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Cygwin Testsuite 0.
-#
-# Report bugs to <[hidden email]>.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
- /*)
-   for as_base in sh bash ksh sh5; do
-     # Try only shells that exist, to save several forks.
-     as_shell=$as_dir/$as_base
-     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell [hidden email] and [hidden email]
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='Cygwin Testsuite'
-PACKAGE_TARNAME='cygwin'
-PACKAGE_VERSION='0'
-PACKAGE_STRING='Cygwin Testsuite 0'
-PACKAGE_BUGREPORT='[hidden email]'
-PACKAGE_URL='https://cygwin.com'
-
-ac_unique_file="Makefile.in"
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-AR
-CPP
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures Cygwin Testsuite 0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/cygwin]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of Cygwin Testsuite 0:";;
-   esac
-  cat <<\_ACEOF
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CPP         C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <[hidden email]>.
-Cygwin Testsuite home page: <https://cygwin.com>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-Cygwin Testsuite configure 0
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-    ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by Cygwin Testsuite $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
-      else
- case $ac_arg in
-  *=* | --config-cache | -C | -disable-* | --disable-* \
-  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-  | -with-* | --with-* | -without-* | --without-* | --x)
-    case "$ac_configure_args0 " in
-      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-    esac
-    ;;
-  -* ) ac_must_keep_next=true ;;
- esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-  ac_cache_corrupted=:
- else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-  eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-  esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link_default") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile.  We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
-    [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
-    *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
-   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
-    * )
- break;;
-  esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
-  ac_file=''
-fi
-if test -z "$ac_file"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
-  test -f "$ac_file" || continue
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-  break;;
-    * ) break;;
-  esac
-done
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
-  ;
-  return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run.  If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
-  { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-  if { ac_try='./conftest$ac_cv_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-    cross_compiling=no
-  else
-    if test "$cross_compiling" = maybe; then
- cross_compiling=yes
-    else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
-    fi
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; then :
-  for ac_file in conftest.o conftest.obj conftest.*; do
-  test -f "$ac_file" || continue;
-  case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-       break;;
-  esac
-done
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
-  ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_AR"; then
-  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_AR" = x; then
-    AR=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AR=$ac_ct_AR
-  fi
-else
-  AR="$ac_cv_prog_AR"
-fi
-
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes: double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \.
-      sed -n \
- "s/'/'\\\\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    if test "x$cache_file" != "x/dev/null"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-      if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
-      else
-        case $cache_file in #(
-        */* | ?:*)
-  mv -f confcache "$cache_file"$$ &&
-  mv -f "$cache_file"$$ "$cache_file" ;; #(
-        *)
-  mv -f confcache "$cache_file" ;;
- esac
-      fi
-    fi
-  else
-    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by Cygwin Testsuite $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <[hidden email]>.
-Cygwin Testsuite home page: <https://cygwin.com>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-Cygwin Testsuite config.status 0
-configured by $0, generated by GNU Autoconf 2.69,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X "  :F $CONFIG_FILES      "
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute).  The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
-   case $ac_f in
-   [\\/$]*) false;;
-   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-   esac ||
-   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
-  esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/winsup/testsuite/configure.ac b/winsup/testsuite/configure.ac
deleted file mode 100755
index 46f9fb092..000000000
--- a/winsup/testsuite/configure.ac
+++ /dev/null
@@ -1,19 +0,0 @@
-dnl Autoconf configure script for Cygwin's testsuite.
-dnl
-dnl This file is part of Cygwin.
-dnl
-dnl This software is a copyrighted work licensed under the terms of the
-dnl Cygwin license.  Please consult the file "CYGWIN_LICENSE" for
-dnl details.
-dnl
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.59)
-AC_INIT([Cygwin Testsuite],[0],[[hidden email]],[cygwin],[https://cygwin.com])
-AC_CONFIG_SRCDIR(Makefile.in)
-
-AC_PROG_CC
-AC_PROG_CPP
-AC_CHECK_TOOL(AR,ar)
-
-AC_OUTPUT(Makefile)
diff --git a/winsup/utils/Makefile.in b/winsup/utils/Makefile.in
index add29d10f..2e67c7286 100644
--- a/winsup/utils/Makefile.in
+++ b/winsup/utils/Makefile.in
@@ -9,7 +9,6 @@
 srcdir:=@srcdir@
 target_builddir:=@target_builddir@
 winsup_srcdir:=@winsup_srcdir@
-configure_args=@configure_args@
 
 CFLAGS_COMMON=-Wimplicit-fallthrough=4 -Werror
 CFLAGS:=@CFLAGS@
@@ -49,7 +48,9 @@ CYGWIN_BINS := ${addsuffix .exe,chattr cygpath gencat getconf getfacl ldd locale
 
 # List all binaries to be linked in MinGW mode.  Each binary on this list
 # must have a corresponding .o of the same name.
+ifdef MINGW_CXX
 MINGW_BINS := ${addsuffix .exe,cygcheck cygwin-console-helper ldh strace}
+endif
 
 # List all objects to be compiled in MinGW mode.  Any object not on this
 # list will will be compiled in Cygwin mode implicitly, so there is no
@@ -163,9 +164,6 @@ install: all
   $(INSTALL_PROGRAM) $$i $(DESTDIR)$(bindir)/$$i; \
  done
 
-$(cygwin_build)/libcygwin.a: $(cygwin_build)/Makefile
- @$(MAKE) -C $(@D) $(@F)
-
 .PHONY: warn_dumper
 warn_dumper:
  @echo '*** Not building dumper.exe since some required libraries or'
@@ -174,6 +172,3 @@ warn_dumper:
  @echo '*** If you need this program, check out the naked-bfd and naked-intl'
  @echo '*** sources from sourceware.org.  Then, configure and build these'
  @echo '*** libraries.  Otherwise, you can safely ignore this warning.'
-
-Makefile: Makefile.in config.status
- /bin/sh ./config.status
diff --git a/winsup/utils/aclocal.m4 b/winsup/utils/aclocal.m4
deleted file mode 100644
index 77959ef37..000000000
--- a/winsup/utils/aclocal.m4
+++ /dev/null
@@ -1,54 +0,0 @@
-# generated automatically by aclocal 1.12.6 -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-dnl This provides configure definitions used by all the cygwin
-dnl configure.in files.
-
-AC_DEFUN([AC_CYGWIN_INCLUDES], [
-: ${ac_cv_prog_CXX:=$CXX}
-: ${ac_cv_prog_CC:=$CC}
-
-cygwin_headers=$(realdirpath "$winsup_srcdir/cygwin/include")
-if test -z "$cygwin_headers"; then
-    AC_MSG_ERROR([cannot find $winsup_srcdir/cygwin/include directory])
-fi
-
-newlib_headers=$(realdirpath $winsup_srcdir/../newlib/libc/include)
-if test -z "$newlib_headers"; then
-    AC_MSG_ERROR([cannot find newlib source directory: $winsup_srcdir/../newlib/libc/include])
-fi
-newlib_headers="$target_builddir/newlib/targ-include $newlib_headers"
-
-INCLUDES="-I${srcdir}/../cygwin -I${target_builddir}/winsup/cygwin"
-INCLUDES="${INCLUDES} -isystem ${cygwin_headers}"
-for h in ${newlib_headers}; do
-    INCLUDES="${INCLUDES} -isystem $h"
-done
-AC_SUBST(INCLUDES)
-])
-
-AC_DEFUN([AC_CONFIGURE_ARGS], [
-configure_args=X
-for f in $ac_configure_args; do
-    case "$f" in
- *--srcdir*) ;;
- *) configure_args="$configure_args $f" ;;
-    esac
-done
-configure_args=$(/usr/bin/expr "$configure_args" : 'X \(.*\)')
-AC_SUBST(configure_args)
-])
-
-AC_SUBST(target_builddir)
-AC_SUBST(winsup_srcdir)
-
diff --git a/winsup/utils/autogen.sh b/winsup/utils/autogen.sh
deleted file mode 100755
index dc2c8b70a..000000000
--- a/winsup/utils/autogen.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh -e
-/usr/bin/aclocal --system-acdir=..
-/usr/bin/autoconf -f
-exec /bin/rm -rf autom4te.cache
diff --git a/winsup/utils/configure b/winsup/utils/configure
deleted file mode 100755
index 04ba6ec2b..000000000
--- a/winsup/utils/configure
+++ /dev/null
@@ -1,4409 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for Cygwin Utils 0.
-#
-# Report bugs to <[hidden email]>.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
-  # into an infinite loop, continuously re-executing ourselves.
-  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
-    _as_can_reexec=no; export _as_can_reexec;
-    # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
-  fi
-  # We don't want this to propagate to other subprocesses.
-          { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
- /*)
-   for as_base in sh bash ksh sh5; do
-     # Try only shells that exist, to save several forks.
-     as_shell=$as_dir/$as_base
-     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-   done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  export CONFIG_SHELL
-             # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
-  *v*x* | *x*v* ) as_opts=-vx ;;
-  *v* ) as_opts=-v ;;
-  *x* ) as_opts=-x ;;
-  * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell [hidden email] and [hidden email]
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
-  test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\/\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
-  # already done that, so ensure we don't try to do so again and fall
-  # in an infinite loop.  This has already happened in practice.
-  _as_can_reexec=no; export _as_can_reexec
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T=' ';; # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T=' ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -pR'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -pR'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -pR'
-  fi
-else
-  as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='Cygwin Utils'
-PACKAGE_TARNAME='cygwin'
-PACKAGE_VERSION='0'
-PACKAGE_STRING='Cygwin Utils 0'
-PACKAGE_BUGREPORT='[hidden email]'
-PACKAGE_URL='https://cygwin.com'
-
-ac_unique_file="mount.cc"
-ac_no_link=no
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-configure_args
-MINGW_CXX
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-INCLUDES
-ac_ct_CXX
-CXXFLAGS
-CXX
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-target_os
-target_vendor
-target_cpu
-target
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL
-winsup_srcdir
-target_builddir'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CXX
-CXXFLAGS
-CCC'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)[^/].*/{
-    s//\1/
-    q
-  }
-  /^X\(\/\/\)$/{
-    s//\1/
-    q
-  }
-  /^X\(\/\).*/{
-    s//\1/
-    q
-  }
-  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures Cygwin Utils 0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/cygwin]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-  --target=TARGET   configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-  case $ac_init_help in
-     short | recursive ) echo "Configuration of Cygwin Utils 0:";;
-   esac
-  cat <<\_ACEOF
-
-Some influential environment variables:
-  CC          C compiler command
-  CFLAGS      C compiler flags
-  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
-              nonstandard directory <lib dir>
-  LIBS        libraries to pass to the linker, e.g. -l<library>
-  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
-              you have headers in a nonstandard directory <include dir>
-  CXX         C++ compiler command
-  CXXFLAGS    C++ compiler flags
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <[hidden email]>.
-Cygwin Utils home page: <https://cygwin.com>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-Cygwin Utils configure 0
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_cxx_try_compile LINENO
-# ----------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_compile ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext
-  if { { ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compile") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_compile
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by Cygwin Utils $as_me 0, which was
-generated by GNU Autoconf 2.69.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
-      else
- case $ac_arg in
-  *=* | --config-cache | -C | -disable-* | --disable-* \
-  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-  | -with-* | --with-* | -without-* | --without-* | --x)
-    case "$ac_configure_args0 " in
-      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-    esac
-    ;;
-  -* ) ac_must_keep_next=true ;;
- esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
-  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special files
-  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
-  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-  ac_cache_corrupted=:
- else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-  eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_aux_dir=
-for ac_dir in ../.. "$srcdir"/../..; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../.. \"$srcdir\"/../.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-
-
-
-. ${srcdir}/../configure.cygwin
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if ${ac_cv_target+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -